Last Modified: 11-29-2007 1.6 G
Service Category: Vehicle Exterior Section: Lighting (ext)
Model Year: 2008 Model: Sequoia Doc ID: RM000003GPV000X
Title: LIGHTING (EXT): SIDE TURN SIGNAL LIGHT ASSEMBLY: INSPECTION (2008 Sequoia)

INSPECTION

1. INSPECT OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH

(a) Check the door mirror turn indicator.

(1) Apply battery voltage to the terminals of the connector, and check the LED illumination condition.

OK:

Measurement Condition

Specified Condition

Battery positive (+) → Terminal 3 (TS+)

Battery negative (-) → Terminal 4 (TS-)

Door mirror turn indicator illuminates

If the result is not as specified, replace the mirror assembly.

2. INSPECT OUTER REAR VIEW MIRROR SUB-ASSEMBLY RH

(a) Check the door mirror turn indicator.

(1) Apply battery voltage to the terminals of the connector, and check the LED illumination condition.

OK:

Measurement Condition

Specified Condition

Battery positive (+) → Terminal 3 (TS+)

Battery negative (-) → Terminal 4 (TS-)

Door mirror turn indicator illuminates